现在还没有相册
现在还没有记录
现在还没有动态
现在还没有日志
-
- Zhongyishen
- //#DEFINE NO_LOTA //default to use lota layer, remove "//" to use gds layer to check drc, and also check lota formuta #IFDEF NO_LOTA SPP = COPY M7_obsi POLY2 = COPY M7_resi NPLUS = COPY M7_momi LOTA_SPP { @ SPP = (SIZE (POLY AND ACT) BY 0.05) OR SPPD (SIZE (POLY AND ACT) BY 0.05) OR SPPD } LOTA_POLY2 { @ POLY2 = (BULK NOT ((SIZE (((FIN2 AND TGO) AND NW) AND PPLUS) BY 0.11) NOT POLY)) OR POLY2D ( ... ...
-
- Zhongyishen
- if(boundp('TrimMenu) then ilDeleteMenuItem('TrimMenu))
-
- Zhongyishen
- /******************************************************* * Auto Trim Metal Stubs (Multi-Select Support) * Fix Version: 3.0 *******************************************************/ procedure( TrimMetalStubs() let( (selectedObjs edgeTol trimCount cv) cv = geGetEditCellView() selectedObjs = geGetSelSet(cv) edgeTol = 0.001 &nbs ... ...
-
- Zhongyishen
- /******************************************************* * Auto Trim Metal Stubs (修正版) *******************************************************/ procedure( TrimMetalStubs() let( (selectedObjs edgeTol trimCount cv) cv = geGetEditCellView() selectedObjs = geGetSelSet(cv) edgeTol = 0.001 trimCount = 0 & ... ...
-
- Zhongyishen
- procedure( TrimMetalStubs() let( (selectedObjs edgeTol trimCount cv) cv = geGetEditCellView() selectedObjs = geGetSelSet(cv) edgeTol = 0.001 trimCount = 0 when( selectedObjs foreach( obj se ... ...
-
- Zhongyishen
- /******************************************************* * Auto Trim Metal Stubs (修正版) *******************************************************/ procedure( TrimMetalStubs() let( (selectedObjs edgeTol trimCount cv) cv = geGetEditCellView() selectedObjs = geGetSelSet(cv) edgeTol = 0.001 trimCount = 0 & ... ...
-
- Zhongyishen
- 看到了没有
1
-
- Zhongyishen
- 你好
/1 
eetop公众号
创芯大讲堂
创芯人才网