Generic synopsys file checksum patcher & string extractor by tanker, v1.6, 2020-05
Type -h for more help..
Searching..... please wait....
Error! Basic block contain too many instructions[4134]
Error! Basic block contain too many instructions[4136]
Error! Basic block contain too many instructions[4140]
Error! Basic block contain too many instructions[4144]
Error! Basic block contain too many instructions[4138]
Error! Basic block contain too many instructions[4140]
Error! Basic block contain too many instructions[4133]
Error! Basic block contain too many instructions[4137]
Error! Basic block contain too many instructions[4097]
Error! Basic block contain too many instructions[4135]
Error! Basic block contain too many instructions[4137]
Error! Basic block contain too many instructions[4133]
Error! Basic block contain too many instructions[4124]
Error! Basic block contain too many instructions[4122]
Error! Basic block contain too many instructions[4108]
Error! Basic block contain too many instructions[4111]
Error! Basic block contain too many instructions[4114]
Error! Basic block contain too many instructions[4132]
Error! Basic block contain too many instructions[4112]
Error! Basic block contain too many instructions[4114]
Error! Basic block contain too many instructions[4117]
Error! Basic block contain too many instructions[4098]
Error! Basic block contain too many instructions[4100]
Error! Basic block contain too many instructions[4139]
Error! Basic block contain too many instructions[4097]
Error! Basic block contain too many instructions[4101]
Error! Basic block contain too many instructions[4129]
Error! Basic block contain too many instructions[4142]
Error! Basic block contain too many instructions[4098]
Error! Basic block contain too many instructions[4140]
Error! Basic block contain too many instructions[4131]
Error! Basic block contain too many instructions[4132]
Error! Basic block contain too many instructions[4124]
Error! Basic block contain too many instructions[4126]
Error! Basic block contain too many instructions[4109]
Error! Basic block contain too many instructions[4111]
./hspice/linux64/python/Omega/snpsys.sysmmm.so:Patch point found! addr=000C2201[0F]
./hspice/linux64/metaencrypt:Patch point found! addr=000E5D61[0F]
./hspice/linux64/HSP_Pack2Go:Patch point found! addr=003B9781[0F]
./hspice/linux64/sputil:Patch point found! addr=005152B1[0F]
./hspice/linux64/hspicerf.so:Patch point found! addr=03322DE1[0F]
./hspice/linux64/amicheck:Patch point found! addr=00295081[0F]
./hspice/linux64/converter:Patch point found! addr=00089761[0F]
./hspice/linux64/hspice:Patch point found! addr=04804951[0F]
Can't open ./synopsys_checksum for Read&Write
Verdi O-2018.09-SP2-11 runs fine with above license
# msg of starting Verdi P-2019.06-SP2-5
###############################################################################################
Release Verdi_P-2019.06-SP2-5 for (RH Linux x86_64/64bit) -- Mon May 18 03:09:39 PDT 2020
Copyright (c) 1999 - 2020 Synopsys, Inc.
This software and the associated documentation are proprietary to Synopsys, Inc.
This software may only be used in accordance with the terms and conditions of a written license agreement with Synopsys, Inc.
All other use, reproduction, or distribution of this software is strictly prohibited.
rcfile = /home/kcat/tmp/novas.rc
guiConfFile (read)= /home/kcat/tmp/novas.conf (working directory)
guiConfFile (write)= /home/kcat/tmp/novas.conf (working directory)
[ERROR] Could not checkout Verdi license. Use verdi -licdebug for more information.
# scl/2020.06 - same license won't start and got following error msg
###############################################################################################
11:46:31 (lmgrd) snpslmd exited with status 0 signal = 17
11:46:31 (lmgrd) Please correct problem and restart daemons