ic*, dsmse, psd, ams and ldv Packages

setenv CDS instdir
setenv CDS_INSTALL_DIR $CDS/tools/dfII
setenv LD_LIBRARY_PATH "/usr/openwin/lib:/usr/dt/:/usr/dt/lib:$CDS/tools/lib:$CDS/tools/verilog/lib:/usr/X11/lib:/usr/lib:/usr/X11R5/lib:$CDS/tools/leapfrog/lib"
setenv SHLIB_PATH /usr/lib:/lib:/usr/lib/X11:$CDS/tools/lib:$CDS/tools/verilog/lib:$CDS/tools/leapfrog/lib
setenv CDS_LIC_FILE $CDS/share/license/license.dat
setenv CDS_Netlisting_Mode Analog
setenv PATH "$CDS/tools/bin:$CDS/tools/dfII/bin:$CDS/tools/leapfrog/bin:$CDS/tools/dracula/bin:$CDS/tools/dsm/bin:$CDS/tools/specctra/bin:$CDS/tools/pcb/bin:${PATH}"
setenv CLS_CDSD_COMPATIBILITY_LOCKING NO
setenv DD_DONT_DO_OS_LOCKS SET

Note: If there are subpackages under $CDS/tools that you need in addition to dfII, leapfrog, etc., add them to the PATH setting above. Similarly, you can remove packages you don't need (e.g. remove leapfrog, dracula and specctra if just setting up silicon ensemble).

You may have to set NC_INST_DIR to $CDS_INSTALL_DIR for AMS.

Note: If running verilog on Red Hat 9, set LD_ASSUME_KERNEL as follows to get around the GLIBC_2.0 error:.

setenv LD_ASSUME_KERNEL 2.4.1

Cadence Chip-assembly router/Virtuoso Custom Router (aka IC Craftsman) Package

setenv CDS instdir
setenv CDS_LIC_FILE $CDS/share/license/license.dat
setenv PATH "$CDS/tools/bin:$CDS/tools/iccraft/bin:$CDS/tools/iccraft/gds_if/bin:$CDS/tools/iccraft/lefdef_if/bin:${PATH}"

SPR (Ambit) Package

setenv CDS_LIC_FILE instdir/license.dat
setenv PATH "instdir/BuildGates/current/bin:${PATH}"

Assura Package

setenv ASSURAHOME instdir
setenv CDS_LIC_FILE $ASSURAHOME/share/license/license.dat
setenv PATH "$ASSURAHOME/tools/bin:$ASSURAHOME/tools/assura/bin:${PATH}"

SEV Package (VoltageStorm, Fire & Ice)

setenv SIMPLEX_HOME instdir
setenv LM_LICENSE_FILE $SIMPLEX_HOME/share/license/license.dat
setenv PATH "$SIMPLEX_HOME/bin:${PATH}"

TSI (SignalStorm/Celtic/Pacific) Package

setenv TSIHOME instdir
setenv CDS_LIC_FILE $TSIHOME/share/license/license.dat
set path=($TSIHOME/tools/bin $path)
setenv TCL_LIBRARY $TSIHOME/tools/sndc/lib/sndc/tcllib

VSDE Package

Note: setup environment for ic package and add the following:

setenv ACV_ROOT instdir/tools/acv
set path=($ACV_ROOT/bin $path)
setenv LD_ASSUME_KERNEL 2.4.1 (Linux only)
	

SNA Package

source instdir/tools/seismic/CSHRC50
setenv CDS_LIC_FILE instdir/share/license/license.dat

NeoCell Package

setenv CDS_LIC_FILE instdir/share/license/license.dat
set path=(instdir/tools/NeoCell/bin $path)

Note: you will also have to set up your environment to run the IC package